VistaScapes Design & Build installs custom paver driveways for Owasso homeowners who want exceptional curb appeal and a driveway that holds up for decades in Oklahoma’s climate. Paver driveways are stronger than asphalt, more repairable than poured concrete, and dramatically more beautiful than either. Call 918-779-1317 for a free paver driveway estimate in Owasso.
Paver Driveway Options in Owasso, OK
Owasso is one of the most desirable communities in the Tulsa metro — with beautiful neighborhoods and homeowners who take pride in their properties. A custom paver driveway is the highest-impact curb appeal upgrade you can make. We install three types of paver driveways in Owasso:
Concrete Paver Driveways
Manufactured concrete pavers in large format (6×9, 6×12, or 12×12 inch) with clean lines and consistent color are the most popular choice for contemporary Owasso homes. Available in tumbled (antique) or smooth finish, in dozens of colors from natural gray to charcoal, tan, and red-toned mixes.
Clay Brick Paver Driveways
Traditional kiln-fired clay paving brick for driveways creates a timeless, elegant appearance that only improves with age. Clay brick is denser and harder than concrete pavers and has natural color variation that manufactured products can’t replicate. We specify SX-grade paving brick rated for severe freeze-thaw exposure.
Natural Stone Paver Driveways
For the ultimate in luxury curb appeal, natural cobblestone or cut quartzite creates a driveway like no other. Natural stone driveways are most common on high-end properties in Owasso and South Tulsa where the investment is supported by home values.
Paver Driveway Construction for Oklahoma
Driveways see significantly more load than patios, so the base construction is critical. Our paver driveway installation process for Oklahoma:
- Excavate 10–14 inches below finished grade (deeper than patio installations due to vehicle loads)
- Install 6–8 inches of compacted crushed stone base in lifts
- Install geotextile fabric at subgrade for soil separation
- Install 1 inch of coarse bedding sand screeded to grade
- Lay pavers in chosen pattern, maintaining consistent joint spacing
- Compact with heavy plate compactor
- Install edge restraints and polymeric sand in all joints
Paver Driveway Cost in Owasso
Paver driveway costs in Owasso depend on paver type, size, and any demolition of existing driveway. Concrete paver driveways typically run $18–$30 per square foot installed. Clay brick driveways run $22–$35 per square foot. A typical two-car driveway (20×40 ft = 800 sq ft) installed in concrete pavers runs $14,000–$24,000. We provide free written estimates.
Get a Free Paver Driveway Estimate in Owasso
Call VistaScapes Design & Build at 918-779-1317 or contact us online to schedule your free driveway consultation in Owasso. We’ll measure your driveway, discuss your style preferences, and provide a detailed written estimate for your custom paver driveway project.
