Drip irrigation is the most water-efficient way to irrigate trees, shrubs, garden beds, and vegetable gardens on Broken Arrow properties. Unlike spray heads that lose significant water to wind drift and evaporation, drip systems deliver water directly to the root zone of each plant — where it’s needed most. VistaScapes Design & Build designs and installs drip irrigation systems throughout Broken Arrow as standalone systems or as part of a complete lawn and landscape irrigation installation. Call 918-779-1317.
How Drip Irrigation Works
Drip irrigation systems distribute water through a network of low-pressure supply tubing and emitters placed at each plant. Instead of spraying water over a broad area, drip emitters release water slowly and directly — at rates of 0.5 to 2 gallons per hour — directly at the base of each plant. This slow application allows water to penetrate deep into the root zone rather than running off the surface or evaporating before it reaches the roots.
Drip systems are ideal for Broken Arrow’s clay soils because the slow application rate allows water to infiltrate clay soil rather than running off. Clay soils absorb water slowly — drip emitters apply water at a rate that clay can absorb effectively, while spray heads often apply water faster than clay can absorb it, leading to surface runoff and waste.
Applications for Drip Irrigation in Broken Arrow
- Landscape bed irrigation — water foundation plantings, shrubs, and perennial beds
- Tree watering — deep root watering for newly planted and established trees
- Vegetable and herb gardens — consistent moisture for edible plantings
- Container plants — automated watering for planters and containers
- Slope irrigation — eliminate runoff on sloped planting areas where spray heads cause erosion
- Newly planted areas — consistent establishment moisture for new plantings during the first season
Combining Drip with Spray Irrigation
Most complete irrigation systems in Broken Arrow use spray or rotor heads for turf areas and drip emitters for planting beds and trees. VistaScapes designs integrated systems that zone these two types appropriately — turf zones run independently from bed and tree zones so each plant type receives the correct amount of water for its specific needs. The controller schedules each zone separately, allowing different run times and frequencies for turf versus landscape beds.
Frequently Asked Questions
Call VistaScapes Design & Build at 918-779-1317 for drip irrigation installation in Broken Arrow, Oklahoma. We serve Broken Arrow, Tulsa, Bixby, Jenks, Owasso, and the surrounding Tulsa metro area.
